home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The 640 MEG Shareware Studio 2
/
The 640 Meg Shareware Studio CD-ROM Volume II (Data Express)(1993).ISO
/
business
/
vicardoc.zip
/
README.1ST
< prev
next >
Wrap
Text File
|
1992-04-16
|
3KB
|
80 lines
VICARDOC - Program Readme File.
NOTE - This program and the companion programs included require DOS 3.0 or
higher to run properly.
The second ZIP file [VICARDOC.ZIP] should contain the following files:
Readme.1st - This file.
VccPRINT.EXE - Program for printing out the Documentation files.
VccPRINT.HLP - Help file for the above program.
*.PDF - Printer Driver files for the above program.
VIC*.LST - Documentation files for VICAR.
PROGRAM INSTALLATION INSTRUCTIONS - for ease of installation UNZIP the
contents of the ZIP File: VICARPGM.ZIP to either a Floppy disk or a
Temporary Directory, whichever is more suitable to your needs.
UNZIP the contents of the ZIP File: VICARDOC.ZIP to another floppy
disk or another directory.
FLOPPY or HARD DISK INSTALL: From the documentation disk, run the
program, with the following Document File specified following the
Program Name:
A>VccPRINT VICINST.LST
From the program menu displayed, select: W hich Printer.
The program will display a list of Printer Driver Files to select
from. Select the one that is the closet to your type of printer. If
no exact matches, select E dit Printer Codes; to define the codes
needed to operate your printer correctly for each of the
attributes.
If a driver already exists for your printer then goto the next
section.
PRINTER DEFINITION - SETUP CODES -
The INITIALIZATION and Reset Codes are NOT needed
unless you have your printer to setup to something
other than the standard 10CPI, 66 Lines/Page, 80
Column format. The only codes you might want to use
here are to invoke LQ or NLQ Print.
DOUBLESTRIKE, SUPERSCRIPT, SUBSCRIPT, and are not
used in the Files and are therfore NOT NEEDED.
CONDENSED PRINT and Reset Codes should be initialized
to put your printer into and out of 12CPI. This is
needed to print Screen layouts on a standard 8.5"x11"
piece of paper.
ITALIC PRINT, if not available on your printer you
might want to specify: Enhanced, Double-Strike or some
other method which will make the text stand out from
the rest.
Make sure to Change the Device name to the correct one if
different from that displayed.
When done Select: S ave Printer Setup, and specify a
name for the Driver you have just created.
PRINTING A FILE - When ready to print the file indicated,
Press P to Print. If the file does not look like it is
printing out properly, Press any key to stop printing,
ESCAPE to abort.
Read the section printed for a detailed description of
what information is needed before and during the
installation process.
PKSFX - Self-Extraction program Copyright 1990, PKWARE, INC.